SKU: 000-12607-001 The Precision-9 Compass supplies accurate heading and rate-of-turn information, based on an internal array of solid-state sensors that measure motion and orientation on nine axes. An easily adjustable mounting bracket and NMEA 2000® connectivity enable simple installation aboard any boat, including an up-mast mounting option for steel-hulled vessels. Key Features Measures heading, rate…
SKU: 000-13895-001 The A2004 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. It features a proven Simrad interface, presented on a wide-angle and zero-fog colour display. Key Features Proven Simrad interface designed for commercial marine applications Large, heavy-duty rotary control dial for precision steering…
SKU: 000-10425-001 The SI80 is a 12/24 V DC signal interface module that provides up to four IEC 61162-1 (NMEA 0183) input and output channels and a SimNet power supply. Key Features 4-port NMEA 0183 signal interface unit for Simrad AP70 and AP80 autopilot systems.
SKU: 000-10191-001 Drive interface for analog or proportional control of rudder or thruster using analog voltage or low level current with possibility for frequency, voltage or current angle feedback, digital drive handshake and external mode input. Key Features Analogue drive interface for additional drives or thrusters Galvanically Isolated analogue output, 4-20mA
SKU: 000-10192-001 Drive interface for on/off or proportional control of rudder or thruster using galvanic isolated solenoids or high level current with possibility for frequency, voltage or current angle feedback, digital drive handshake and external mode input. Key Features Solenoid drive interface for additional drives or thrusters Galvanically Isolated Solenoid output, up to 10A
SKU: 000-10186-001 The brains behind the brawn, the AC70 is an essential component in your autopilot system. It contains the steering computer and electronics for the drive unit motor and clutch whilst also acting as an interface to other system components. Key Features Boats Over 40ft NMEA0183® Connectivity
SKU: 000-11479-001 The SG05 Pro Autopilot Interface provides autopilot control from Simrad AP70 and AP80 control heads to CANbus steering systems, and can be used as part of an IMO approved autopilot system. Key Features The ONLY IMO approved Autopilot interface for CANbus steering systems The Simrad SG05 Pro Autopilot Controller has 2 SimNet ports…
SKU: 000-14958-001 The AP70 Mk2 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. Replacing both the AP70 and AP80 as our IMO/SOLAS autopilot controller, the AP70 Mk2 retains much of the well-reputed platform of its predecessors, but with a brilliant new display and modernised…
SKU: 000-10189-001 Customizable autopilot computer that can be configured with up to four drive boards depending on the installation requirements. Key Features Configurable for use with up to three drive interface boards CAN-bus supply 4 channel IEC 61162-1 (NMEA 0183) RX/TX (not mounted) Bulkhead mounted
SKU: 000-13899-001 A2004 Autopilot pack with A2004 controller, AC70 Autopilot computer and RF300 rudder feedback.
SKU: 000-10188-001 Drive computer for on/off or proportional control of rudder or thruster using galvanic isolated solenoids or high level current with possibility for frequency, voltage or current angle feedback, digital drive handshake and external mode input. Built in CAN-bus supply and 4 channel IEC 61162-1 (NMEA 0183) RX/TX. Key Features Galvanically Isolated solenoid output,…
SKU: 000-10187-001 Drive computer for analog or proportional control of rudder or thruster using analog voltage or low level current with possibility for frequency, voltage or current angle feedback, digital drive handshake and external mode input. Built in CAN-bus supply and 4 channel IEC 61162-1 (NMEA 0183) RX/TX. Key Features Galvanically Isolated analogue output, 4-20mA…
SKU: 000-13900-001 A2004 Autopilot pack with A2004 controller, AC70 Autopilot computer, RF300 rudder feedback and Precision 9 compass.
SKU: 000-15041-001 The AP70 Mk2 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. Replacing both the AP70 and AP80 as our IMO/SOLAS autopilot controller, the AP70 Mk2 retains much of the well-reputed platform of its predecessors, but with a brilliant new display and modernised…
SKU: 000-15039-001 AP70 MK2 Professional Autopilot basic pack. Kit contains AP70 MK2 controller, AC70 computer and RF300 rudder feedback. Key Features Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable…
SKU: 000-15042-001 AP70 MK2 Professional Autopilot controller. IMO Analog Pack. Includes AP70 MK2 controller and AC80A Computer Key Features Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable work modes…
SKU: 000-15040-001 AP70 MK2 Professional Autopilot solenoid pack. Kit contains AP70 MK2 controller, AC80S Computer and RF45X rudder feedback. Key Features Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable…
